How To Repair A Washing Machine Door Handle For Whirlpool
Repair guide : Door and porthole Washing machine
Level : Easy Time : 30 min Author : Alexandre
75 people have done this repair successfully ! Why not you lot?
Is the door or porthole of your washing machine cracked and leaking water? Or fifty-fifty if there are no obvious signs of breakage, you find leaks when you wash your clothes? Do non panic , SOSav is hither to help you! Our technicians have produced this illustrated repair guide and commented on how to replace the door of his washing car itself in a few minutes and for two to three times cheaper than calling a professional convenience store.
Symptoms:
- Leaking water while the machine is running
- No closing of the door possible
- Cleaved or damaged door mechanism
- Cracked porthole
Some advice before you starting time
Recommended repair kit
Required spare parts
Stride 1
Before dismantling the door and the door, brand sure, for obvious rubber reasons, that there is no more than laundry in your auto and that the machine is disconnected (water and electricity).
To brainstorm, open the door of your washing motorcar.
Step 2
Using the Torx or Phillips screwdriver (depending on the model of your machine), unscrew the two screws circled in red holding the door.
Step three
Then grasp the door and remove information technology from the car.
Pace four
And then re-apply the Phillips screwdriver to unscrew the six screws circled in red property the plastic cover of the door.
Step v
And then manually unclip the two plastic parts of the door.
Do non force too much to damage anything.
Pace half dozen
The door endmost system and the door of your washing machine are now partially disassembled.
Step seven
Then catch the door and remove it.
The window of your machine also as the endmost system are now disassembled.
Step 8
If you wish to replace the door retentivity organisation, information technology is necessary to disassemble the metal back up.
To do this, use a ratchet and a socket adjusted to the bore of the retaining screws to unscrew the 2 screws circled in red.
Enter the holding organization and remove it.
Footstep nine
The complete door, the porthole of your washing machine as well as the maintenance system are now disassembled.
Replace them with new parts if necessary.
Recommended repair kit
Required spare parts
Source: https://www.sosav.com/guides/home-appliance/big-electromenager/washing-machine/door-window/
Posted by: cordovaworythe1986.blogspot.com
0 Response to "How To Repair A Washing Machine Door Handle For Whirlpool"
Post a Comment